Analog Inputs | 2 channels, electronically balanced, XLR type connectors, nominal +4 dBm, maximum +24dBm, 20 k ohm impedance. |
Outputs | 8 channels, electronically balanced, XLR type connectors, nominal +4dBm, maximum +24dBm, 150 ohm impedance. |
Digital Inputs | AES/EBU-Pro (XLR type connector), Yamaha Y2 (8-pin DIN type connector) |
Sampling Frequency | 48 kHz (analog in)/ 44.1 kHz/32 kHz |
A/D Converters | 19 bits x 2 |
D/A Converters | 20 bits x 8 |
Frequency Response | 20 Hz ...20kHz |
S/N Ratio | 110 dB typical (analog in, emphasis on) 107 dB typical (analog in, emphasis off) |
THD | Less than 0.005% (Emphasis On 1kHz at maximum) Less than 0.007% (Emphasis Off 1kHz at maximum) |
Internal Memory | 15 user RAM locations |
Control Interface | RS485, 9,600/38,400 baud, XLR type connectors (male and female) |
Analog Attenuators | Motor-drive, post-D/A |
Digital Attenuators | -18dB...+6dB, 0.5dB steps |
Filters | HPF frequency: 20Hz...16khz. HPF slope:-24, -18, -12, -6, THRU HPF cutoff gain:-6, -5,-4, -3. LPF frequency: 20hz...16khz. LPF slope:-24, -18, -12, -6, THRU. LPF cutoff gain: -6, -5, -4, -3. |
Parametric EQ | 2 bands per channel. Frequency:20Hz...16kHz, 1/6 oct steps. Gain:-18dB...+18dB, 1dB steps. Q:LSH/HSH, 0.5~10 |
Delay | (Fs=48kHz) 0...1365,313 ms, 21 mms Step (Fs=44.1kHz) 0...1486,054 ms, 23mms Step (Fs=32kHz) 0...2047,969 ms, 31 mms Step |
Compressor/ Limiter | Threshold:0dB...+20dB Comp ratio: 1:1... infinity symbol:1 Attack time:1...20 milliseconds. Release time:0.01... 5 seconds |
Muting | Individual channel |
Level Indicators | 7-segment LED peak indicators x 2, including CLIP indicator, pre-D/A |
Dimensions (W x H x D) | 480 x 101 x 389.6 mm (18-7/8" x 4" x 15-3/8") |
Weight | 8.5kg (18lbs. 12 oz) |